Sanyo LCD-24XR10F Instruction Manual page 12

Connecting an HDMI device
HDMI cable
Connecting a component video device
12
Audio cable
Component cables often have red, green, and blue color-coded video connectors and red and white audio connectors.
Match the colors when making connections.
Connecting a computer
TV REAR
Connections
TV REAR
HDMI device
TV REAR
Component video device
Component
video cable
To monitor port
(15-pin D-Sub)
D-Sub cable
Audio cable
(Continued)
How to connect an HDMI device:
Connect the HDMI cable between the HDMI jack on the TV
and HDMI output jack on the device.
Note: If your device has an HDMI connection, we
recommend you use that to get the best quality possible.
To play from the HDMI device:
1. Turn on your TV, then press SOURCE button. The Input
Source menu opens.
2. Press 5 or6 to select HDMI1 or HDMI2 correspondingly,
then press OK to confirm.
3. Turn on the HDMI device and set it to the correct mode.
Refer to the instructions that came with the HDMI device.
Note:
If the external device has DVI output only, use a DVI to HDMI
adapter cable to connect to the HDMI terminal. Connect the audio
cable to the PC IN AUDIO jack on the TV rear.
To connect a component video device:
Connect the Component Video cable between the Y, Cb/Pb,
Cr/Pr input jacks on the TV and Y, Cb/Pb, Cr/Pr output jacks on
the device .
Connect the Audio cable between the AUDIO input jacks on
the TV and AUDIO output jacks on the device.
To play from the component video device:
1. Turn on your TV, then press SOURCE button. The Input
Source menu opens.
2. Press 5 or6
confirm.
3. Turn on your external device and set it to the correct mode.
See the device's user guide for more information.
To connect a computer:
Connect a VGA cable between the VGA jack on the computer
and the VGA input jack on the unit.
Connect an Audio cable between the AUDIO output on the
computer and AUDIO input jack on the unit.
To play video from the computer:
1. Turn on your TV,
button. The Input Source menu opens.
2. Press 5
OK to confirm.
3. Turn on your computer, and adjust the display
properties as required.
To audio output jack
to select Component, then press OK to
then press SOURCE
or 6
to select D-SUB, then press