[Protect] - Panasonic Lumix DMC-FS8 Operating Instructions Manual

Operating instructions for advanced features
Hide thumbs Also See for Lumix DMC-FS8:
Table of Contents

Advertisement

You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu.
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
• Repeat these steps for each picture.
• The settings are cancelled when [MENU/
SET] is pressed again.
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
∫ Cancelling all the [PROTECT] settings
1
Select [CANCEL] on the screen shown in step
2
Press 3 to select [YES] and then press [MENU/SET].
3
Press [MENU/SET] to close the menu.
• If you press [MENU/SET] while cancelling protection, the cancelling will stop halfway.
Note
• The protect setting may not be effective on other equipment.
• Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
• Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they
cannot be deleted when the card's Write-Protect switch is set to [LOCK].
Advanced (Playback)

[PROTECT]

[SINGLE]
Press 2/1 to
select the picture.
2
- 112 -
(P21)
Press 3/4/2/1
to select the
pictures.
and then press [MENU/SET].
[MULTI]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-fs7Lumix dmc-fs6

Table of Contents