Connecting The Camera To A Printer; Setting The Print Mode Menu - Sanyo  Instruction Manual

Connecting the Camera to a Printer

You can print your images directly using a PictBridge compatible printer.
1. Turn on your Printer. Check that the printer is
turned on, there is paper in the printer, and
there are no printer error messages.
2. Connect one end of the USB cable to the
printer while the other end to USB terminal on
the camera.
3. The USB mode menu appears on the screen.
Select Printer by using the
press the OK button.
4. Enter the print mode and print the selected
images.
For details on the following page "Setting the
Print Mode Menu".

Setting the Print Mode Menu

Print Mode menu appears on the screen after the connection between a printer and your camera is
established.
Print Mode includes three major settings:
• Print Select. An image can then be selected to print.
• Print All. Prints all images.
• Print Index. Prints all images as thumbnails.
To set Print Select
1. Use the or
printing.
2. Specify the number of copies. Use the
increase/decrease number.
3. Press the Function/Delete button to toggle between
turning on/ off the date stamp.
4. Press the OK button to enter printer settings.
To set Print All and Print Index
Repeat the same steps 2 to 4, then enter printer settings.
or key and
keys to scroll and select an image for
or key to
62