Connecting To A Pictbridge Compliant Printer; Printing Images - Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Instruction Manual

CONNECTING TO A PICTBRIDGE COMPLIANT PRINTER

If a printer that supports PictBridge is available, images can be printed by connecting the digital still
camera directly to the PictBridge-compatible printer without using a computer.
Connecting the camera to the printer
1. Connect one end of the USB cable to the USB terminal of the camera.
2. Connect the other end of the USB cable to the USB port on the printer.
3. Turn on your camera.
The [USB] screen appears.
4. Select [Printer] with the

Printing images

When the camera is properly connected to a PictBridge compliant printer, the PictBridge menu is displayed on the
monitor.
1. Select the item you want to configure with the
the SET button.
[Images]: Select whether you want to print specific image or all images.
You may also select printing number for specific image.
[Date Print]: According to the printer type, select whether you want
to print the image with date imprint or not.
[Paper Size]: Select the desired paper size according to the printer type.
[Layout]: Select the desired printing layout according to the printer
type.
[Print]: After all settings are configured, select this item to start
printing.
2. If you select [Images] in the previous step, the figure shown on the right
hand side will appear. Select [Select], [All] or [DPOF] with the
buttons, and press the SET button.
[Select]: Select to print one specific image.
[All]: Select to print all images.
[DPOF]: Select to print images with DPOF settings.
[Exit]: Exit from Images option.
/ buttons, and press the SET button.
/ buttons, and press
/
USB
SET:Enter
PictBridge
SET:Enter
Images
SET:Enter
EN-55