Checking the Last Picture (Review)
2,4
1
After taking a picture, when auto review
(P59) is set to [ON], the captured picture is
displayed on the LCD monitor for about 2
seconds, but you can also check the
picture following the methods shown
below.
1
1
3
REVIEW
ªErasing the captured picture during
the review
2
3
EXIT
4
REVIEW
• In motion image mode [
After taking a picture, press the
[REVIEW/SET] button.
• The last captured picture is
displayed. Pressing 2/1, it is
possible to select the picture to
display. Pressing the zoom button
(T), the captured picture is zoomed
2.5 times (A) and 4 times if you
press once again. Pressing the zoom
button (W), you will reduce it.
Press the [
Press 2/1 to select [YES].
Press the [
[REVIEW/SET] button.
• The picture is erased.
• Once erased pictures cannot be
recovered.
picture is reviewed.
] button.
] button or the
], the index
27