Identifying Controls - Panasonic Viera TH-37PX7B Operating Instructions Manual

Attaching the pedestal
If required, additional fixings are supplied for securing the TV to a wall and table.
Band (2) Screw (2)
Nominal diameter 4 mm × 12
■
Securing to a base
Fix pedestal and base together with band.
■
Securing to a wall
Fix to wall or post with strong commercial wire or chain.
Remove Attach
8
Wood screw (2) Clamp (2)
Select two screws which have held the rear
cover of the TV (one screw each from right
and left side at the same height position).
Remove the two screws you selected, and
attach the clamps to the TV using the
removed screws.

Identifying Controls

Power LED
•
Standby: red
On: green
When using the remote control, indicates the TV has received a command.
Mains power On / Off switch
Remote control
signal receiver
DVB LED
•
Active for Timer Programming or
Standby for Direct TV Recording :orange (flash)
Timer Programming On :orange
Standby On / Off switch
(Switches TV On or Off standby)
TV Guide (p. 16)
GUIDE
OK button to confirm selections and choices
Press after selecting programme positions to
quickly change programme.
MENU
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus (p. 23)
ASPECT
Changes aspect ratio
(p. 15)
Access VIERA Link Menu 1
(p. 43)
Programme / channel change buttons (0-9) 4
and Teletext page buttons. (p. 14 and p. 21)
When in Standby mode, switches TV On.
7
Programme Information
(p. 15)
Selects programmes in sequence
TEXT STTL INDEX HOLD
Teletext (p. 20)
Subtitles
Showing subtitles (p. 15)
PROGRAMME
VCR / DVD operations
(p. 19)
Changes the input mode
Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
Function select
•
Volume / Contrast / Brightness / Colour
/ Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 32)
Changes the input mode
TV - switches DVB (digital broadcasting)
/ Analogue mode
(p. 14)
INPUT
AV - changes AV input mode
EXIT
EXIT
(Returns to TV screen)
Cursor buttons to make selections and
OK
adjustments
RETURN
Returns to the previous menu
Coloured buttons used for the
selection, navigation and operation of
OPTION DIRECT TV REC
various functions
DIRECT TV Recording
2 3
To immediately record programme in VCR /
DVD recorder with Q-Link connection
5 6
(p. 40)
8 9 Option menu
Sets the selectable settings of viewing
and sound options easily
(p. 15)
0
VCR
Sound mute On / Off
Volume
Still picture (p. 15)
Teletext Hold
(p. 22)
REC VCR DVD
Teletext Index
(p. 22)
TV
(p. 18)
9