Panasonic LumixDMC-FZ45 Operating Instructions Manual page 110

Stop the recording by pressing the motion picture button again.
•
If the card becomes full in the middle of recording, the camera stops recording
automatically.
•
You can also start/stop motion picture recording by pressing the shutter button.
•
Sound will go off when pressing the motion picture button or shutter button indicating
motion picture recording start/stop. Sound volume can be set in [BEEP LEVEL] (P30).
∫ Setting the aperture value and shutter speed for each [EXPOSURE MODE]
[EXPOSURE MODE]
P
A
S
M
Note
•
Aperture value
–
Set the aperture value to a higher number when you want a sharp focus background. Set the
aperture value to a lower number when you want a soft focus background.
•
Shutter speed
–
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
–
Manually setting a higher shutter speed may increase the noise on-screen due to the higher
sensitivity.
–
When recording under lighting such as fluorescent lighting, mercury lighting and sodium
lighting, the colouring and brightness of the screen may change.
• "
Refer to Recording Motion Picture
motion pictures.
•
The sound recording specifications on this model have been changed to improve audio
quality. For this reason, some motion pictures recorded in [MOTION JPEG] may not be
played back with Panasonic digital cameras (LUMIX)
(Motion pictures recorded with a Panasonic digital camera (LUMIX) can be played back
on this model.)
¢ Models launched before December 2008, and some models launched in 2009 (FS, LS
series).
Advanced (Recording pictures)
Aperture value
—
F2.8 to F11 (Wide)/F5.2 to F11
(Tele)
—
F2.8 to F11 (Wide)/F5.2 to F11
(Tele)
"
on P102
- 110 -
1/30 to 1/20000th
1/30 to 1/20000th
(When using Manual Focus, the
shutter speed can be set from 1/8
to 1/20000th.)
for other settings and operations for recording
¢
.
Shutter speed (Sec.)
—