Advertisement
Materials
Dimensions
Voltage
Wire connectors
Finish
Hardware
Weight
Bulb
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product's serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no serial number. Keep this
manual and invoice in a safe and dry place for future reference.
failure to follow all instructions listed below may result in
1.
this 6" Off road light requires complete installation. It is important that you
read the entire manual to become familiar with this product before it is installed or
used. if you dO nOt have experience doing this type of electrical work, the job
should be done by a qualified automotive or electrical service technician.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
2.
accidents.
wear ansi-approved safety goggles and heavy-duty work gloves during in-
3.
stallation or service.
Make certain the vehicle's engine is turned off and the battery is disconnected
4.
before installing.
for technical questions, please call 1-800-444-3353.
SKU 95811
specificatiOns
Steel housing with steel lens rings and steel, rubber supported mounting
bracket
7" high at the bracket (mounted/surface)
8-1/2" overall height with bracket mounted
4-5/8" Deep
12 VDC
6" pigtail with split-loom and brass bullet connectors. (Not a fused system)
Chrome housing and hardware. Silver reflector with clear (round) glass lens
Yellow-zinc plated
about 2 lb.
H-3/55W Halogen (HT201)
save this Manual
safety rules
read and understand all instructiOns
electric shock, fire, and/or serious injury.
saVe these instructiOns
warning!
Page 2
Advertisement
