Samsung BD-C8800A User Manual page 34

Setup
TV Screen Size
Lets you enter the actual screen size of your TV so
that the product can adjust the image according to the
screen size and display an optimal 3D image.
(The maximum allowed screen size is 116 inches for
this product.)
CAUTION
!
▪
If you want to enjoy a 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
product and wear a 3D glass before playing the 3D
content.
▪
While watching the 3D video, all analogue component
and composite signals will be blocked automatically.
▪
All 3D signals are output only using the HDMI cable
and through the HDMI OUT port.
▪
As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
▪
Some functions such as BD Wise, or setting the
screen size or resolution may not operate properly in
3D play mode.
▪
You must use a high-speed HDMI cable for a proper
output of the 3D signal.
▪
Stay at least three times of the length of the screen
distant from the TV.
- It is recommended to place the 3D video screen
forward at eye level.
▪
If the product is connected to some 3D devices, the
3D effect may not function properly.
▪
You can not use this product for switching a 2D
content to 3D.
▪
"Blu-ray 3D" and "Blu-ray 3D" logo are trademarks
of Blu-ray Disc Association.

English
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting.
16:9 Normal
•
16:9 Wide
•
4:3 Letter Box
•
4:3 Pan-Scan
•
NOTE
✎
▪
Depending on the disc type, some aspect ratios may
not be available.
▪
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
▪
If you select the 4:3 Pan-Scan or 4:3 Letter Box, you
can't see full screen by pressing the FULL SCREEN
button on the remote control.
▪
If you select the 16:9 Normal, 4:3 Pillarbox may
displayed.
In this case, you can't see full screen by pressing
the FULL SCREEN button on the remote control.
Certain movies(4:3 source) will be
displayed in 4:3 Pillarbox (black
bars on sides of picture) if 16:9
normal is selected.
You can view the full 16:9 picture
on your widescreen TV.
Select when you want to see the
total 16:9 ratio screen a Blu-ray
Disc/DVD supplies, even though
you have a TV with a 4:3 ratio
screen. Black bars will appear at
the top and bottom of the screen.
Select when you want to see the
16:9 video supplied by the Blu-ray
Disc/DVD without the black bars
on top and bottom, even though
you have a TV with a 4:3 ratio
screen(extreme left and right portion
of the movie picture will be cut off).