Standby Control; Lamp Schedule; Osd Display - Samsung SyncMaster 460UTn-2 User Manual

Note
Enabled only in PC mode.

Standby Control

Sets the standby mode, which will be activated when no input signal is detected.
•
Off
A message will read <No Signal> if no input signal is detected.
•
On
Power-saving mode will be activated if no input signal is detected.
•
Auto
When no input signal is detected,
- Power-saving mode will be activated if an external device is connected.
- A message will read <No Signal> if no external device is connected.
Note
• Enabled only in PC, DVI, HDMI, or DisplayPort mode.
• This function at <AUTO> doesnt work at HDMI source.

Lamp Schedule

Adjusts the luminance to a user-specified value at a specified time.

OSD Display

Displays or hides a menu item on the screen.
Adjusting the LCD Display