Malfunction
Appliance cools too much.
Heavy build up of frost, possi-
bly also on the door seal.
Unusual noises.
If the door remains open for
more than 7 min., the light
will be switched off by the
electronics.
Possible Cause
Temperature is set too cold.
Door seal is not air tight (pos-
sibly after changing over the
hinges).
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
This is normal, no error has
occurred.
Remedy
Turn the temperature regula-
tor to a warmer setting tem-
porarily..
Carefully warm the leaking
sections of the door seal with
a hair dryer (not hotter than
approx. 50 °C). At the same
time shape the warmed door
seal by hand such that it sits
correctly.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend
the component out of the
way.
Close the door and re-open it,
the light will function auto-
matically again.
23