Table of Contents
Advertisement
1-4) CAMERA Composition and Connecting Method to
MONITOR
After positioning monitor and installing three cameras to a desired location, please connect CAMERA
to MONITOR through CAMERA CABLE (MCB-60 or MCB-100) as shown in the below figure.
Please check whether or not it is properly connected.
Connection status checking method :
•
Turn on the monitor after connecting cameras, and check if camera image is displayed.
The initial screen mode of monitor is quad mode.
•
In case monitor and camera is not connected, OSD 'L'(LOSS) will be displayed on blue
screen.
English-30
Advertisement
Table of Contents
