2-6) Camera And Monitor Connections - Samsung SMO-210DN User Manual

2-6) Camera and Monitor connections

1) External terminal connecting method for CAMERA
PIR Sensor
• An additional PIR sensor or external sensor can also be connected.
• The additional PIR sensor can be connected as shown in the illustration above.
• Sensor's trigger signal is NO (Normal Open).
• Sensor is not supplied. (Sold separately)
a. Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of External device.
b. Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of External device.
c. Connect the A/R terminal on the rear panel to the Alarm Reset terminal of External device.
d. Connect the G (ground) terminal on the rear panel to the Ground terminal of External device.
Sensor in put
English-2-18
Camera alarm injack
Sensor