Setting The User Password - Samsung R40 Manual

■

Setting the User Password

You can configure user passwords so that other users can use the system.
N N o o t t e e
N N o o t t e e
Before configuring a user password, a supervisor password must have been con-
figured.
Users can start the system with their user password, but cannot enter into the
System Setup.
Deactivating the supervisor password also deactivates the user password.
On the 'Set User Password' item, press <Enter>, and complete step 3-4 of
Configuring the Supervisor Password.
■
Activating the Booting Password
N N o o t t e e
N N o o t t e e
Before activating the booting password, the supervisor password must have been
configured.
Set the 'Password on boot' option to [Enabled].
From now on, you must enter the password to boot the system.
■
Setting up a Hard Disk Drive Password
A supervisor password must be set using the Set Supervisor Password menu.
If you set a password for a hard disk drive, it cannot be accessed from another
computer.
Press Enter in the 'Set HDD 0 Password' item and define a password as
described in Step 3 of the Setting up the Supervisor Password.
■
Deactivating the Password
1. On the password to delete, press <Enter>. (e.g. supervisor password)
2. Enter the current configured password, and press <Enter>.
3. Leave the 'New Password' and 'Confirm New Password' field empty, and press
<Enter> to deactivate the password.
Chapter 6. Customizing your computer
6-5