Copy Cut-Off - Sharp FO-3150 Operation Manual

3
When you are ready to begin copying, press
If MEMORY IS FULL appears...
If you place a large number of originals in the feeder, the memory may
become full before all pages can be scanned (the display will show MEMORY
IS FULL). If this happens, press
scanned, and then repeat the copy procedure for the remaining pages,
including the page that was being scanned when the memory became full.

Copy Cut-off

When making a copy of a document that is longer than the printing paper, use
the copy cut-off setting to select whether the remaining part of the document
will be cut off or printed on a second page. The initial setting is YES (cut off
the remainder). To change the setting, follow the steps below.
FUNCTION
1
Press
2
Press once and
3
Press once.
4
Press to set copy cut-off to YES
1
(the remaining part of the document
will not be printed), or
cut-off to NO (the remaining part will be
printed on a second page).
STOP
5
Press
once and four times.
once.
to set copy
2
to return to the date and time display.
COPY/HELP
START
to copy the pages that have been
The display briefly shows
your selection, then:
Making Copies
.
Display:
PRINT SET-UP
COPY CUT-OFF
1=YES, 2=NO
LIFE COUNTER
69