Connectors; Floppy Disk Drive Connector: Fdd1; Fan Power Connectors: Cpu_Fan1/Cpu_Fan2/Sys_Fan1 - MSI MS-7324 Manual

M S-7324 mATX M ainboard
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN,
and USB Ports.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

Fan Power Connectors: CPU_FAN1/CPU_FAN2/SYS_FAN1

The CPU_FAN1/CPU_FAN2 (processor fan), SYS_FAN1 support system cool-
ing fan with +12V. It supports four/three-pin head connector. W hen connecting the
wire to the connectors, always take note that the red wire is the positive and should
be connected to the +12V, the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN1 supports the fan control. Fan/heatsink with 3 or 4 fins are both
available.
3. Be sure to configure the CPU FAN PIN Select in BIOS for the CPU Fan you
are using first.
4. Please refer to the recommended CPU fans at Intel
2-14

Connectors

FDD1
CONTROL
SENSOR
+1 2V
GND
CPU_FAN1
CPU_FAN2
SENSOR
+1 2V
GND
SYS_FAN1
®
official website.