G Setting The Paper Size When An Extra Size Is Loaded; Tray 1; Setting The Paper Type (Except The Bypass Tray); Setting The Paper Size When An Extra Size Is Loaded - Sharp AR-C172M Operation Manual

Setting the paper type
(except the bypass tray)
Follow these steps to change the paper type setting
when the paper type has been changed in a paper tray.
For the paper types that can be used in each tray, see
page 2-9. To change the paper type setting for the
bypass tray, see page 2-12.
1 Press the [CUSTOM SETTINGS] key.
Touch the [TRAY SETTINGS] key.
2
TOT L COUNT
CONTRA
ADDRES
TRAY SETTINGS
CONTRO
KEYBOARD
KEY
SELECT
3 Select the paper tray for which the setting
is to be made. (For the tray numbers, see
the tray specifications on page 2-9.)
TYPE / SIZE

TRAY 1

PLAIN /
TRAY 2 PLAIN /
4 Select the type of paper that was loaded in
the tray.
PLAIN LETTER HEAD
PRE-PRINTED PRE-PUNCHED
RECYCLED COLOUR
NOTE
Special paper such
envelopes, and postcards can only be used in the
bypass tray.
5 Touch the [OK] key to complete the
setting.
The custom setting
menu screen will
appear.
The paper tray selection
screen will appear.
If the desired tray is not
on the display, use or
key to scroll the
display until it appears.
The currently selected
paper type will be
highlighted. To change
the setting, touch the
desired type.
as transparency film,
Setting the paper size when
an extra size is loaded
When a paper tray is set to "extra", this informs the
machine that an extra size is being used. It does not
inform the specific size. To enter the specific size of the
paper loaded, follow the steps below.
For example, if 8-1/2" x 11" size paper is loaded in the
tray (with the size slide set to "extra"), you can use this
procedure to set the paper size recognized by the
machine to 8-1/2" x 11" size. If you loaded an irregular
size of paper, you can enter the dimensions of the
paper.
To set the paper size when an extra size of paper is
loaded in the bypass tray, see page 2-12.
1 Perform steps 1 through 4 of "Setting the
paper type" at left.
2 Touch the key to display the paper size
setting screen.
CUSTOM SETTINGS
TRAY 3 TYPE/SIZE SETTING
EXTRA SIZE
A3 B4 A4
A5 8K
B5R
1 / 8 X13 1 /
11X17 8 X14
2
2
1 / 1 / 1 / 1 / EXTRA
5 X8 7 X10 R
2 2 4
2
3 When the loaded paper size appears in the
display (if you loaded an INCH-based size
such as 8-1/2" x 11"), touch the size key to
highlight it, and then touch the [OK] key to
complete the procedure.
4 If an irregular size of paper was loaded
after the [EXTRA] key was touched, touch
the key in the screen of step 2 to display
the following screen.
X 139
Y 182
When the screen opens the X key will be
highlighted. Use the
enter the X dimension. Next touch the Y key to
highlight it and enter the dimensions for Y.
The permitted range for the X dimension is 139 to
432 mm (5-1/2 to 17 inches), and the permitted
range for the Y dimension is 182 to 297 mm (7-1/4
to 11-3/4 inches).
When both have been entered, touch the [OK] to
complete the operation.
LOADING PAPER
OK
2/3
A4R B5
16K 16KR
1 / 1 /
8 X11 8 X11R
2 2
(139 432)
mm
(182 297)
mm
and touch keys to
2-11
2