MISFEED REMOVAL
The copier will stop when a misfeed occurs. The misfeed
(
) indicator will blink, and blinking red misfeed location
indicators will indicate the approximate misfeed location.
If paper is accidentally torn during removal, be sure to
remove all pieces.
AR-5015 N
30
Be careful not to damage the photoconductive drum.
For misfeeds in optional equipment, see its section of the
operation manual.
First confirm the misfeed location.
(
P. 58)
(
P. 30, 33)
Misfeed in the bypass tray
Gently pull the misfed paper out.
1
Lift slightly on the side cover and slide the cover out
2
until it stops. Close the side cover by pressing the
handle on the cover.
G
The misfeed (
Misfeed in the copier
Open the bypass tray. Lift slightly on the side cover and
1
slide the cover out until it stops.
AR-5120
) indicator will go out.
(
P. 58)
(
P. 30, 33)
(
P. 34)