Table of Contents
Advertisement
M46 AM English, A31008-H7600-A1-1 (28. May 2002, 18:13)
66
Device
up
¢
§Menu§
¢
Language
Set the language of the display text.
When "automatic" is set, the lan-
guage of your service provider is
used. If a language that you do not
understand happens to be set, the
phone can be reset to the language
of your service provider with the fol-
lowing input:
A
*
#0000#
Display
Own greeting
(p. 44)
Bitmap viewer
(p. 43)
Screensaver
(p. 44)
Illumination
Can be switched on and off (switch-
ing it off increases the standby
time).
Big letters
You can choose between two font
sizes for the display.
Contrast
You can set the display contrast.
Appearance
(p. 44)
¢
Setup
Device
Select a function.
Setup
Keys
Any key to answer
You can press any key to accept an
incoming call (except
Auto key lock
If
Auto key lock
pad is locked automatically if no key
has been pressed for one minute in
standby mode. This prevents the
phone from being used accidentally.
However, you can still be called and
you can still make an emergency
call.
The keypad can also be directly
locked and unlocked as follows:
#
Key tones
You can set the type of acoustic key
tone:
Click
or
Tone
¢
Setup
§Menu§
¢
Select a function.
Status
Fact. settings
The phone is reset to the default val-
ues (factory setting) (does not apply
to SIM card and network settings):
*
# 9 9 9 9 #
Phone identity
The phone ID (IMEI) is displayed. This
information may be useful for cus-
tomer service.
Fast search
S
).
is activated, the key-
Hold down
.
or
Silent
¢
Device
A
Advertisement
Table of Contents
