Call Forward - Siemens M46 User Manual

M46 AM English, A31008-H7600-A1-1 (28. May 2002, 18:13)
You can set the conditions for which
forward
calls are forwarded to your mailbox
or other numbers.
¢
§Menu§
Set call forwarding:
The most common condition for call
forward is:
Unanswered
¢
§Menu§
MN
§Select§
Set
J
or
@
§OK§

Call forward

Call forward
Call forward
Select Unanswered.
(covers the Not reachable,
conditions,
No reply, Busy
see right)
Press.
Select.
Enter the phone number
to which the caller will
be forwarded (if not done
already)
select this phone number
from the Phonebook or
via §Mailbox§.
After a short pause, the
setting is confirmed by
the network.
All calls
All calls are forwarded.
o
Spec.forward
~
Not reachable
Forward if the phone is switched off
or out of range.
No reply
A call is only forwarded after a delay
(depends on the network).
The period can be set by the user to a
maximum of 30 seconds in 5 second
intervals.
Busy
Forward if a call is in progress. If
waiting is
hear the call waiting tone during a
call (p. 21).
Receiving fax
Fax calls are forwarded to a number
with a fax connection.
Receiving data
Data calls are forwarded to a phone
number with a PC connection.
Symbol in the top line of
the display in standby
mode.
activated (p. 70), you will
49
~
~
Call
~
~