Setting Up The Telephone For Use; Making Calls; Saving Numbers; Dialling A Number - Gigaset 5010 Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

Setting up the
telephone for use
Recommended
installation of telephone
Do not expose the tele-
phone to direct sunlight or
other sources of heat.
Operate at temperatures
of between +5°C and
+40°C.
Maintain a distance of at
least one metre between
the telephone and radio
equipment, e.g. radio tel-
ephones, radio pagers or
TV sets. Otherwise, tele-
phone communication
could be impaired.
Do not install the tele-
phone in dusty rooms as
this can limit the service
life of the telephone.
Furniture lacquer and
polish can be adversely
affected by contact with
parts of the unit (e.g.
feet).

Making calls

Dialling a number

co
Lift handset, dial
number.
The redial key
used to insert pauses when
dialling, starting at the 2nd
digit.
Dialling with the repertory
keys
c
Lift handset. (If
necessary press
shift key
2nd level reper-
tory key).
:
Press repertory
key.

Last number redial

The last number dialled is
automatically saved (max. 32
characters).
;
can be
=
for
2
EN
c;
Baby call dialling
Requirement: Baby call
(direct call) is activated. The
K
key
lights up when the
handset is lifted.
c
Mute is not possible with the
baby call function.
Mute
You can deactivate the tele-
phone's handset and micro-
phone during a call. You and
the other party will then no
longer be able to hear one
another. The connection will
not be broken; this will be indi-
cated by a waiting melody,
unless you have previously
deactivated the waiting mel-
ody.
J

Saving numbers

Various settings on the tele-
phone have to be completed
with the Set
To cancel the save or setting
operation (e.g. after an incor-
rect entry) without saving,
replace the handset instead of
?
pressing
setting is then retained.
When saving numbers,
pauses can be inserted by
pressing
1st digit!).
When saving numbers, the
last number dialled can be
inserted at the 1st digit by
pressing
digits).
Lift handset, press
last number redial
key.
Lift handset then
press any key
?
(except
and
J
).
During a call: Press
mute key.
Switch the hand-
set and micro-
phone back on:
Press the key
again.
?
key.
. The original
;
(not at the
;
(max. 32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents