Opening Lists With The Message Key; Dialling With Directory/List - Gigaset C460 IP Guía Del Usuario

Using the directory and lists
Opening lists with the
message key
You can use the message key f to open
the following lists:
u
SMS list
u
Network mailbox
If your network provider supports this
function and the network mailbox is
configured for fast access via key 1
(page 15).
u
Calls list (precondition: Calling Line
Identification enabled)
The numbers of the last 30 incoming
calls are saved. Multiple calls from the
same number are all saved.
An advisory tone sounds as soon as a new
message arrives in a list. The message key
f flashes. A message appears in the
display.
If you press the flashing f key, you will
see all the lists that contain new mes-
sages. If only one list contains new mes-
sages, this will be opened automatically.
Please note:
If calls are saved in the network answering
machine you will receive a message if the
appropriate settings have been made (see the
network mailbox instructions of your network
provider).
Opening list
¢
f
If necessary, select list
q
Select entry.
For additional information on the lists,
please see the full user guide for your
Gigaset C460 IP (page 5).
22

Dialling with directory/list

¤
Open directory/list.
¤
Select entry with q.
¤
Briefly press/press and hold the talk
key c (page 17).
Please note:
You can only dial IP addresses via VoIP.