Chuck Rated Air Pressure Recommended Hose Speed Air Inlet Weight You will need the manual for the safety warnings and precautions, assembly in- structions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover.
Page 3
Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 19. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
Page 4
(California Health & Safety Code 25249.5 et seq.) When unpacking, check to make sure that the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Grip the Air Drill firmly with both hands and press down on the Trigger (8). Caution: If the Air Drill will not turn, or if it stalls while drilling, do not raise the outlet pressure of the air compressor. Do not continue with attempts to drill until the problem is resolved.
Refer to the Air Compressor Operator’s Manual. Manual Tool Lubrication Disconnect the Air Drill from the air supply and turn it so the Air Inlet fitting is facing upward. Hold the Trigger (8) in and place a few drops of pneumatic tool oil into the air inlet (use SAE #10 weight oil if air tool oil is not available).
Part Description Housing O-ring O-ring Valve Stem O-ring Bushing Trigger Spring Trigger Trigger Screw Muffler Cover Screw Air Inlet Bearing End Plate Rotor Rotor Blade Cylinder NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
Page 8
90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.