Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
3/8" reversible
air angle drill
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
visit our website at: http://www.harborfreight.com
email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
Save thiS manual.
ITEM 69495
Advertisement
Related Manuals for Central Pneumatic 69495
Summary of Contents for Central Pneumatic 69495
- Page 1 3/8" reversible air angle drill visit our website at: http://www.harborfreight.com ITEM 69495 email our technical support at: tech@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
- Page 2 2. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 69495...
- Page 3 Item 69495 For technical questions, please call 1-800-444-3353. Page 3...
- Page 4 WARNING marking concerning Cubic Feet per Minute flow Risk of Respiratory Injury. Wear NIOSH-approved dust mask/respirator. Cubic Feet per Minute flow SCFm at standard conditions WARNING marking concerning Risk of Explosion. Page 4 For technical questions, please call 1-800-444-3353. Item 69495...
- Page 5 7. To reduce vibration, maintain seek medical advice as soon as possible. tool as explained in this manual. If abnormal vibration occurs, stop immediately. Save theSe inStRuCtiOnS. Item 69495 For technical questions, please call 1-800-444-3353. Page 5...
- Page 6 * Maximum speed at stated maximum air pressure. Excess air pressure is hazardous and may cause the tool to exceed stated maximum speed. Components and Controls Throttle Air Inlet Reverse Valve Chuck Figure a Page 6 For technical questions, please call 1-800-444-3353. Item 69495...
- Page 7 The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Item 69495 For technical questions, please call 1-800-444-3353. Page 7...
- Page 8 Page 8 For technical questions, please call 1-800-444-3353. Item 69495...
- Page 9 Item 69495 For technical questions, please call 1-800-444-3353. Page 9...
- Page 10 The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Page 10 For technical questions, please call 1-800-444-3353. Item 69495...
- Page 11 Clean external surfaces of the tool with clean, dry cloth, and apply a thin coat of tool oil. Then store the tool indoors out of children's reach. Item 69495 For technical questions, please call 1-800-444-3353. Page 11...
- Page 12 4. Quarterly (every 3 months) – tool Disassembly, Cleaning, and inspection: Have the internal mechanism cleaned, inspected, and lubricated by a qualified technician. If the vanes need replacement, replace them all as a set. Page 12 For technical questions, please call 1-800-444-3353. Item 69495...
- Page 13 3. Replace damaged components. 4. Dirty, worn or damaged valve. 4. Clean or replace valve assembly. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Item 69495 For technical questions, please call 1-800-444-3353. Page 13...
- Page 14 Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 69495...
- Page 15 Diagram Item 69495 For technical questions, please call 1-800-444-3353. Page 15...
- Page 16 limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.