Putting The Telephone Into Service - Gigaset 100 Operating Manual

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619

Putting the telephone into service

Step 1: Connecting the base station
First of all, connect your base station to the telephone jack
and the mains supply.
• Insert small round connector of
the power cable into the socket.
• Place the cable in the cable duct
(for strain relief).
• Insert the power supply unit into
the wall socket.
• Insert the rectangular
connector provided on
the telephone cable into the socket.
• Place the cable in the cable duct.
• Insert telephone jack into telephone socket.
* Appearance may differ depending on the country!
If you do not want to use the telephone cable supplied,
ensure that you use either a straightforward extension cable
or a telephone cable with 3/4 connector assignment,
otherwise your Gigaset 100 will not function correctly.
1 free
2 free
3 L a
4 L b
5 free
6 free
Giga100.fm
220 V/
230 V
4
02.04.01
Telephone
jack*