Keep work area clean. Cluttered areas invite injuries. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. SKU 07528 Specifications Item ½ inch, Jacobs type...
Page 3
Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 19. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
Page 4
(California Health & Safety Code 25249.5 et seq.) When unpacking, check to make sure that the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
See photo on the cover. Screw the Handle (34) onto the threads of the Brass Ring and tighten. Attach the desired bit (not supplied) to the Air Drill Chuck (32), making sure it is locked in place with Chuck Key (36).
Grip the Air Drill firmly with both hands and press down on the Trigger (8). Caution: If the Air Drill will not turn, or if it stalls while drilling, do not raise the outlet pressure of the air compressor. Do not continue with attempts to drill until the problem is resolved.
Air Inlet Bearing End Plate Rotor Rotor Blade Cylinder NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 07528 Parts List Item Front Plate Washer Gear Gear Gear Plate...