Table of Contents
Advertisement
Warning! read all instructions
Failure to follow all instructions listed below may result in electric shock,
fire, and/or serious injury. The term "power tool" in all of the warnings listed
below refers to your line-operated (corded) power tool or battery-operated
(cordless) power tool.
Keep your work area clean and well lit.
1.
accidents.
2.
do not operate the chipper/shredder in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. The Chipper/Shredder can
create sparks which may ignite the dust or fumes.
3.
Keep children and visitors away while operating the chipper/shredder.
tractions can cause you to lose control. Provide barriers or shields as needed.
4.
stay alert.
Watch what you are doing and use common sense when operating the
Chipper/Shredder. Do not use the Chipper/Shredder while tired or under the influ-
ence of drugs, alcohol, or medication. A moment of inattention while operating the
Chipper/Shredder may result in serious personal injury.
5.
dress properly.
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or
long hair can be caught in moving parts.
6.
avoid accidental starting.
before moving the Chipper/Shredder or before performing any service, mainte-
nance, or cleaning procedures on the unit.
7.
remove adjusting keys or wrenches before turning the chipper/shredder on.
A wrench or a key that is left attached to a rotating part of the machine may result
in personal injury.
8.
do not overreach.
9.
use safety equipment.
heavy-duty work gloves, and a dust mask or respirator when using this product.
ANSI approved hearing protection must also be used.
do not force the tool.
10.
will do the job better and safer at the rate for which it is designed.
11.
do not use the chipper/shredder if the On/Off switch does not turn it on
or off. Any tool that cannot be controlled with its power switch is dangerous and
must be replaced.
SKU 95964
For technical questions, please call 1-800-444-3353.
general saFety Warnings
saVe these instructiOns
Do not wear loose clothing or jewelry. Contain long hair. Keep
Be sure the Engine Ignition is in the "OFF" position
Keep proper footing and balance at all times.
Always wear ANSI approved safety impact goggles,
Use the correct tool for your application. The correct tool
Cluttered benches and dark areas invite
Dis-
Page 3
Hide quick links:
Advertisement
Table of Contents
