Specifications - Central Machinery 95964 Operating Instructions Manual

Chipper Chute Capacity
Chipper Dimensions
Hopper Capacity
Hopper Dimensions
Blade
Accessories
Ground Clearance
Wheel Type
Engine Type
the emission control system for this engine is warranted for standards set by
the u.s. environmental protection agency and by the california air resources
Board (also known as carB). For warranty information, refer to the last pages of
this manual.
nOte: this product requires oil and fuel to be added before
starting. attempting to start the engine without oil Will
ruin the engine and void the warranty.
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of
the front cover. Write the product's serial number in the back of the manual near the as-
sembly diagram, or write month and year of purchase if product has no number. Keep
this manual and invoice in a safe and dry place for future reference.
SKU 95964 For technical questions, please call 1-800-444-3353.

speciFicatiOns

1-1/4" Maximum Diameter
2-3/4" x 2-3/4" Square opening
3/8" Maximum Limb Diameter
18" L x 14-3/4" W
One Shredding Plate
4 Chipper Blades
Spark Plug Wrench
3-1/2" At Lowest Point
7-1/2" Dia. x 2-1/4" W. Solid Rubber & Plastic
Engine Family: 7YJ GS, 1631YC, EM
0.55 gallon, 5.5 HP, OHV Gas Engine
2007 E.P.A. Phase II
2007 California EVH & EVP
Oil Capacity: 20 ounces (0.6 liter)
save this Manual
REV 07h, 08e
Page 2