System Connections; Connecting External Av Signal Source - Polaroid TFT-LCD TV User Manual

System Connections

•
Do not connect the power cord until all other connections have been made.
•
Ensure that you observe and correctly connect colored cables when connecting audio and video
cables.
•
Before connecting, open the cover on the right side of the unit's rear panel.

Connecting External AV Signal Source

Use the AV cables to connect an external AV signal source to the AV input jacks on the rear panel of
the unit.
Use the S-VIDEO cable to connect the external AV signal source to the S-VIDEO input jack on the
rear panel of the unit .
After connection, turn on the power of the unit and the external AV signal source and then press the
SOURCE button to shift to Composite or S-VIDEO mode.
Note:
1. S-Video signals typically provide better image quality than composite video signals.
If both composite and S-Video video input signals are connected, the TV will default to the
2.
S-Video signal.
- 9 -