Polaroid FULL HD LCD TV User Manual page 9

1. Install the base stand; place the TV on a
solid surface.
Ensure that the TV is placed in a well
ventilated area. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, do
not expose to fl ame sources, such as lit
candles. Avoid heat, direct sunlight, and
exposure to rain or water. The equipment
should not be exposed to dripping or
splashing water.
2. Connect the antenna cable or CATV cable
to the aerial socket ANT IN 75Ω at the
back of the TV set.
3. Remote control:
Remove the cover of the battery
compartment. Insert the 2 batteries
supplied (Type AAA 1.5V).
Min
1 m
4. Power:
Insert the power cord in the wall socket
with AC power supply. You can see LED
staus on the front panel. If the LED color is
Blue, the TV power is on. If the LED color
is Red, this TV is in standby mode.
5. Turn the TV on:
Press the POWER key on the Remote
control or the Front panel control buttons.
The screen's display will come on after
several seconds.
7
Power Key
POWER
VIDEO COMP PC/HDMI TV