Polaroid Digital HD-Ready LCD TV User Manual page 10

Introducing the LCD TV
How to setup the TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV's ANT. terminal
(refer to page 15-18).
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Step 1 Slide the back cover up to open the
battery compartment of the remote
control.
Step 2 Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suffer damage.
Connect other an external AV device (refer to page 19-25).
Effective range
Your remote control can be activated from up the LCD TV 5m away, if points
directly in front of the device.
30° 30°
5M
8