Table of Contents
Advertisement
TIMER
There are two ways to use the timer:
Using the timer as a safety shutoff:
If a specific time is set for a cooking zone, the cooking zone will shut itself off once
this period of time has elapsed. This function can be used for multiple cooking zones
simultaneously.
Using the timer to count down:
The countdown timer cannot be used if a cooking zone has been switched on.
Setting the safety shutoff
The cooking zone(s) for which you want to apply the safety shutoff must be
switched on.
1. Using the Timer control
cooking zone for which the safety shutoff time
is to be set.
After the first active cooking zone is selected,
touching the timer's control sensor will cause
the corresponding indicator to flash slowly.
For example, the front left indicator
corresponds to the front left cooking zone.
display.
The next active cooking zone is selected by touching the Timer control
sensor again.
2. Use the Timer setting selectors (
of time, for example, 15 minutes,
after which the cooking zone will
automatically switch itself off.
The safety shutoff is now activated.
To display the time remaining for any of the cooking zones, use the Timer
control
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting selectors (
set period of time has elapsed, the cooking zone automatically switches itself off,
an acoustic signal sounds as confirmation and the timer display indicates .
To make the settings more quickly, touch any of the
sensors until the desired value is reached.
If the
minutes; if the
at 1 minute.
CTN464FB01_XSA_DG68-00347A_EN.indd 25
or
) to set the desired amount
sensor.
control sensor is touched first, the time setting will begin at 99
control sensor is touched first, the time setting will begin
sensor, select the
will appear in the timer
or
). After the
or
control
hob use _25
2011-06-07
6:52:01
Advertisement
Table of Contents
