Stopping Play - Panasonic TX-15LV1F Operating Instructions Manual

When the menu continues onto another screen
After step 4 on page 40, press SKIP (
•
To return to the previous menu screen Press SKIP (
•
SKIP ( ) may not always work. For operation, refer also to the jacket of the disc concerned.
,
Stopping play and returning to the menu screen
Press DVD MENU or TOP MENU.
•
The buttons may not work depending on the disc used.
After operation
Remove the disc and press
What is playback control?
If a Video CD has "playback control" written on its disc or jacket, it means that particular scenes or information can
be selected for viewing interactively with the TV monitor using the menu screen.
Note:
The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item.
When no further selections are to be played, be sure to press STOP to clear the menu display.
For your reference:
When appears on the screen when a button is pressed, the operation is prohibited by the player or disc.

Stopping play

Press STOP during play.
RESUME function
The player records the point where STOP was pressed during play.
•
Press PLAY again, and play will resume from this point.
•
When the disc is ejected or STOP is pressed again, the RESUME
function will be cleared.
This feature remains active if the player is set to the standby mode
and then turned back ON.
Notes:
•
Cancelling the RESUME function will also clear the chapter review
function.
•
The chapter review function may not work with some DVDs.
•
The DVD/CD disc may feel warm when removed from the player,
but, this will not affect the disc.
) .
)
(remote control) botton to set the player to the standby mode.
Basic play
Press PLAY to resume
PLAY
STOP
41