TG7150-7170FX(e).book Page 9 Wednesday, January 10, 2007 3:32 PM
Displays
Display icons
Display
Meaning
icon
Within range of a base unit
w
L When flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
Handset is accessing base
L
unit. (intercom, paging,
changing base unit
settings, etc.)
Handset is on an outside
k
call.
Battery strength
5
Handset number (Standby
[2]
display setting, page 18)
New voice mail message
0
received
Line is being used by
another handset.
*1 Voice mail users only
*1
(page 23)
Connections
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
(220–240 V, 50 Hz)
To telephone
network
Use only the included AC
adaptor and telephone
line cord.
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Preparation
Hook
9