Table of Contents
Advertisement
Changing the unit's settings
Signal Condition
You can check the quality and strength of digital broadcast signals.
Realign the aerial if you are receiving a poor signal.
When "Signal Condition" is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press [ 1 2 CH] to select a digital channel. "D" appears on the
unit's display.
3 Display the Setup menu again (➡ 71).
Press [ e , r ] to select "Signal Condition" and press [OK].
The quality and strength of the signal are shown.
Press [ 1 2 CH] to select the channel.
Signal Quality
0
Signal Strength
0
RETURN
Signal Quality
Below 2 (display red):
The signal quality is so poor that there may be interference in the
pictures and sound.
2–5 (display orange):
The signal quality is basically adequate, but brief interference in the
pictures and sound is possible in isolated case.
Over 5 (display green):
Optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. "0" means signal strength 0%,
"10" means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplifi cation at your aerial.
When the signal is weak:
– adjust the position and direction of the aerial.
– adjust the aerial reception with "DVB Manual Tuning" in the Setup
menu (➡ 71).
– check that the current digital broadcast channel is correctly
broadcasting.
DVB Preferred Language
Press [ e , r ] to select "DVB Preferred Language" and press [OK].
You can select up to 2 different subtitles
(
For Italy, Spain and Switzerland
audio and subtitles digital broadcasts are received. Select the order
of priority.
If the selected language is not available, then the original language
will be selected.
Multi-Audio
Multi-Audio (alternative)
For Germany
[English]
[German]
[Spanish]
For Italy, Spain and Switzerland
[English]
[German]
[Spanish]
[Catalan]
[Corsican]
Subtitle
For Italy, Spain and Switzerland
Subtitle (alternative)
[English]
[German]
[Spanish]
[Catalan]
[Corsican]
■ Settings for Analogue Services
Press [OK] to show the following settings.
Manual Tuning
You can delete analogue channels and set the analogue channel
details.
Press [OK] to show Manual Tuning screen.
Manual Tuning
Pos Name
Ch
Pos Name
1
ARD
4
11
2
ZDF
2
12
3
N3
5
13
4
HR3
8
14
5
BR3
10
15
6
16
7
17
SELECT
8
18
OK
9
19
RETURN
10
20
Delete
Move
Add
RQT9090
72
10
10
CH +
CH –
) and audio tracks to be used when
[Italian]
[French]
[Italian]
[French]
[Basque]
[Galician]
For Italy, Spain and Switzerland
[Italian]
[French]
[Basque]
[Galician]
Ch
To delete a programme position
Press [ e , r , w , q ] to select a programme position and press the
"Red" button.
Note
This unit does not support SECAM L, L'.
For Germany
To change the tuning settings for individual programme
position
1 Press [ e , r , w , q ] to select a programme position and press
[OK].
For Germany
Pos
901
Manual
Name
ARD
Tuning
Channel
4
Fine Tuning
Auto
Video System
Auto
Off
Mono
SELECT
Title Page
301
RETURN
RETURN : leave
2 Press [ e , r ] to select an item and press [ q ].
Pos
Programme position in the table
(You cannot change the programme position.)
Name
To enter or change the name of a TV
station
Press [ e , r , w , q ] to enter station name and
press [OK].
If the station name needs a blank space,
select the blank between "Z" and " ".
Channel
To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [ e , r ] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV
station has been tuned.
After the desired TV station is tuned, press
[OK].
Fine Tuning
To obtain the best tuning condition
Press [ e , r ] to adjust the best tuning
condition and press [OK].
Press [ q ] to return to "Auto".
Video System
To select the video system type
Press [ e , r ] to select "PAL" or "SECAM" if the
picture lacks colour, and press [OK].
Auto
This unit automatically distinguishes PAL
and SECAM signals.
PAL
For receiving PAL signals.
SECAM
For receiving SECAM signals.
Audio Mode
To select the audio reception type
If sound quality is poor, press [ e , r ] to select
For Italy, Spain and
"BG" or "L" and press [OK].
Switzerland
BG
PAL B.G.H/SECAM B.G
L
SECAM L, L'
Mono
To select the type of sound to be recorded
Press [ e , r ] to select "On" if the stereo sound
is distorted due to inferior reception
conditions, or if you want to record the normal
(mono) sound during a stereo, bilingual or
NICAM broadcast, and press [OK].
Title Page
To enter the Teletext title page for a
channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [ e , r ] or numbered buttons to enter the
number and press [OK].
To fi nd the correct title page for the station,
refer to its Teletext TV guide.
For Italy, Spain and Switzerland
Pos
901
Manual
Name
ARD
Tuning
Channel
4
Fine Tuning
Auto
Video System
Auto
BG
Audio Mode
SELECT
Mono
Off
Title Page
301
RETURN
RETURN : leave
Hide quick links:
Advertisement
Table of Contents
