Pioneer PRS-D200 Owner's Manual page 9

MAN-PRS-D200-GB.fm Page 9 Monday, February 20, 2006 4:17 PM
Specifications
Power source .......................................................................... 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system ........................................................................................................... Negative type
Current consumption ...................................................................... 25.8 A (at continuous power, 4 Ω)
Average current drawn* ........................................................................... 8.7 A (4 Ω for two channels)
Fuse ........................................................................................................................................ 30 A x 2
Dimensions ......................................................................................... 304 (W) x 56 (H) x 202 (D) mm
Weight ........................................................................................ 2.9 kg (Leads for wiring not included)
Maximum power output ................................................................ 300 W x 2 (4 Ω) / 1200 W x 1 (4 Ω)
Continuous power output ............................... 150 W x 2 (at 14.4 V, 4 Ω, 20 Hz to 20 kHz 1.0% THD)
Load impedance ......................................................................................... 4 Ω (2 Ω to 8 Ω allowable)
Frequency response ........................................................................... 10 Hz to 40 kHz (+0 dB, –3 dB)
Signal-to-noise ratio ........................................................................................ 100 dB (IEC-A network)
Distortion ........................................................................................................... 0.005 % (10 W, 1 kHz)
Separation ...................................................................................................................... 70 dB (1 kHz)
Low pass filter ................................................................................ Cut off frequency: 40 Hz to 120 Hz
High pass filter ............................................................................... Cut off frequency: 40 Hz to 120 Hz
Bass boost ............................................................................................................... Frequency: 50 Hz
Gain control ...................................................................................................... RCA: 400 mV to 6.5 V
Maximum input level / impedance ......................................................................... RCA: 6.5 V / 22 kΩ
Note:
• Specifications and the design are subject to possible modification without notice due to
improvements.
* Average current drawn
The average current drawn is nearly the maximum current drawn by this unit when an audio
signal is input. Use this value when working out total current drawn by multiple power
amplifiers.
17.6 A (4 Ω for one channel)
17.6 A (2 Ω for two channel)
600 W x 1 (at 14.4 V, 4 Ω, 1 kHz 1.0% THD)
300 W x 2 (at 14.4 V, 2 Ω, 1 kHz 1.0% THD)
(Bridge connection: 4 Ω to 8 Ω allowable)
Cut off slope: –12 dB/oct
Cut off slope: –12 dB/oct
Level: 0, 6, 9, 12 dB
Speaker: 1.6 V to 26 V
Speaker: 26 V / 90 kΩ
9