Correcting Distorted Sound; Resetting The Audio Functions - Pioneer AVH-P5200BT Operation Manual

Menu operations
Canceling auto EQ measurement
mode.
9 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period, high tempera-
tures may cause distortion, color change or
malfunction.
Note
Do not press h (eject) to open or close the panel
when you are using the microphone.

Correcting distorted sound

(Function for multi-channel processor)
When listening to a CD or other source on
which the recording level is high, setting the
level of each frequency to high may result in
distortion. You can switch the digital attenua-
tor to low to reduce distortion.
! Sound quality is better at the high setting
so this setting is usually used.
1 Display the system menu.
Refer to Introduction of menu operations on
page 40.
2 Touch Digital ATT.
3 Touch Digital ATT on the system menu
to select the digital attenuator level.
High—Low

Resetting the audio functions

You can reset all audio functions.
1 Display the system menu.
Refer to Introduction of menu operations on
page 40.
2 Touch Audio Reset.
3 Touch Reset .
Ready to reset. Are you sure? appears in the
display.
# To cancel this function on the way, touch
Cancel.
4 Touch Reset again.
The reset end was carried out. appears in
the display and audio functions are reset.
Section
12
65
En