Audio Drc; Virtual Surround - Pioneer DVR-310 Operating Instructions Manual

The Video/Audio Adjust menu
11
4 Use the
the currently selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
Tip
• To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
Note
• The Black Setup setting applies only when playing
NTSC discs.

Audio DRC

• Default setting: Off
When watching Dolby Digital DVDs at low volume, it's
easy to lose low level sounds completely—including
some of the dialog. Switching on Audio DRC (Dynamic
Range Control) can help by bringing up the low level
sounds, while controlling high level peaks.
1 During playback or when paused, press HOME
MENU and select 'Video/Audio Adjust'.
2 Select 'Audio Adjust'.
3 Select 'Audio DRC'.
4 Use the
DRC from 'Off' to 'Max'.
Audio Adjust
Audio DRC

Virtual Surround

Exactly how much difference you can hear between the
settings will depend on the material.
Remember
• Audio DRC is not effective when listening to a disc via
the digital output when Dolby Digital Out is set to
Dolby Digital. In this case adjust the dynamic range
from your AV amplifier/receiver.
72
En
(cursor left/right) buttons to adjust
(cursor left/right) buttons to adjust
Off Max
Off
Virtual Surround
• Default setting: Off
Switch on Virtual Surround to enjoy surround sound
effects from just two speakers.
When playing any Dolby Digital encoded material, SRS
TruSurround produces a deep, cinema-like sound space
from any pair of speakers.
SRS TruSurround is licenced from SRS Labs and
certified by Dolby Laboratories for Virtual Dolby
technology.
1 During playback or when paused, press HOME
MENU and select 'Video/Audio Adjust'.
2 Select 'Audio Adjust'.
3 Select 'Virtual Surround'.
4 Use the (cursor left/right) buttons to
change the setting.
Audio Adjust
Audio DRC
Virtual Surround
Note
• Virtual Surround has no effect on 96 kHz Linear PCM
audio, DTS audio and audio CDs.
• You can hear the Virtual Surround effect through the
analog outputs and the DV output. The Virtual
Surround setting has no effect on the rear panel
optical digital output.
• TruSurround, SRS and the
trademarks of SRS Labs., Inc. TruSurround technology
in incorporated under license from SRS Labs., Inc.
Off Max
Off
symbol are