Troubleshooting - U.S. General 99925 Set Up And Operating Instructions Manual

problem
Overheating 1.
2.
3.
Compressor 1.
operates, but with
low air output
2.
3.
Incorrect pressure 1.
gauge reading
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect air supply before service.
SKU 99925

troubleshooting

possible causes
Poor ventilation.
Dirty cooling surfaces.
Compressor undersized for
application.
Valve or regulator loose or
leaking.
Valve or regulator damaged.
Air tank not pressurized yet.
Pressure gauge worn or
damaged.
For technical questions, please call 1-800-444-3353.
likely solutions
1. Move the compressor to an area with better
air circulation.
2. Clean compressor.
3. Check air requirements of tools.
1. Repair leaks.
2. Have valve or regulator repaired by a
qualified technician.
3. Allow pressure to build.
1. have pressure gauge replaced by a qualified
technician.
Page 11