U.S. General 99925 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. U.S. General Manuals
  4. Air Compressor
  5. 99925
  6. Set up and operating instructions manual

U.S. General 99925 Set Up And Operating Instructions Manual

25 gallon, 3.5 hp
Hide thumbs
Table of Contents

Advertisement

Quick Links

25 gallon, 3.5 hp air
set up and operating instructions
distributed exclusively by harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe this manual.
©
Copyright
2008 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
compressor
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
99925
®
.

Advertisement

Table of Contents
loading

Related Manuals for U.S. General 99925

Summary of Contents for U.S. General 99925

  • Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

  • Page 2: Important Safety Information

    SKU 99925 For technical questions, please call 1-800-444-3353. notice is used to address practices not related to personal injury. caution, without...
  • Page 3 Keep proper footing and balance at all times. SKU 99925 For technical questions, please call 1-800-444-3353. This enables better control of the tool in unexpected situations. dress properly. do not wear loose clothing or jewelry.

  • Page 4: Air Compressor Safety Warnings

    Industrial applications must follow OSHA requirements. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or miss- ing, contact Harbor Freight Tools for a replacement. Avoid unintentional starting. Prepare to begin work before turning on the tool.

  • Page 5: Grounded Tools: Tools With Three Prong Plugs

    It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SKU 99925 For technical questions, please call 1-800-444-3353. saVe these instructions. grounding...
  • Page 6 (see 3-prong plug and outlet.) symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions per Minute n 0 xxxx/min. (RPM) SKU 99925 For technical questions, please call 1-800-444-3353. Page 6...

  • Page 7: Specifications

    SKU 99925 For technical questions, please call 1-800-444-3353. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

  • Page 8: Operating Instructions

    Make sure the air tool’s throttle or switch is in the off position. Connect the tool that will be used for the job to the airline. SKU 99925 For technical questions, please call 1-800-444-3353. Close the in-line safety valve be- tween the compressor and the tool.
  • Page 9 Tank, two turns to release any built-up moisture. Close the valve after moisture has drained out. Do not remove the Drain Valve. SKU 99925 For technical questions, please call 1-800-444-3353. drain Valve Disconnect the air hose and tool.

  • Page 10: Maintenance And Servicing

    Warning! if the supply cord of this power tool is damaged, it must SKU 99925 For technical questions, please call 1-800-444-3353. be replaced only by a qualified service technician. please read the FolloWing...

  • Page 11: Troubleshooting

    Pressure gauge worn or gauge reading damaged. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect air supply before service. SKU 99925 For technical questions, please call 1-800-444-3353. troubleshooting likely solutions Move the compressor to an area with better air circulation.

  • Page 12: Parts List

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 99925 For technical questions, please call 1-800-444-3353. parts list...

  • Page 13: Assembly Diagram

    SKU 99925 For technical questions, please call 1-800-444-3353. Page 13...

  • Page 14: Limited 1 Year / 90 Day Warranty

    (90 days if used by a professional contractor or if used as rental equipment). Harbor Freight Tools also warrants to the original purchaser, for a period of ninety days from date of purchase, that all other parts and components of the product are free from defects in materials and workmanship.

Table of Contents