On screen messages
Message
This timer will not follow the TV Guide
information
Press OK to continue, RETURN to restore
original timer
Timer already expired !
Timer Event Due to Start
DVB 1: BBC1 has been
programmed for recording at
Timer incorrect !
Timer overlap
Press OK to keep, RETURN to edit
Tuner Locked
Please stop recording to operate
Unable to download, please check
equipment
■
SD Card
Cannot read file
No SD card inserted
No valid file to play
Over 9999 pictures found.
(max. is 9999)
68
●
If you edit the start time or end time of Guide link recording more than
10 minutes, it will no longer be performed as Guide link recording. The
recording will be performed according to the time setting.
●
Starting time in Timer Programming is already past. Set correctly (p. 47).
●
This message will appear 2 minutes before timer programming event due
∗∗
∗∗
to start.
:
●
Set Start and End times in Timer Programming correctly (p. 47).
●
Timer programming events are overlapped. If you press the OK button,
the first timer programming event will start and finish, the next timer
programming event can then start.
●
If you want to unlock, cancel Direct TV Recording (p. 52 and p. 54) or
Timer Programming (p. 47).
●
The tape or disc is active. Stop the equipment and try again.
●
The file is broken or unreadable.
●
The TV does not support the format.
(For the applicable formats and data
●
Confirm SD Card is inserted correctly.
●
The card has no data.
●
Maximum valid number of photos is 9,999.
Meaning / Action
p. 62)