Panasonic Viera TX-P37C10B Operating Instructions Manual page 67

Message
No module inserted
No recording - Check media
No recording - Already recording
No recording - Unknown reason
No service
No signal
PIN incorrect!
Please check settings and connections
on HDMI devices.
Please wait.
Recording this channel now
Reset to Factory Shipping Condition
Completed.
Please switch off TV.
Sending Preset Data
Please wait!
Software successfully updated.
Press EXIT to continue.
Software update failed. Please try again
later.
Press EXIT to continue.
Meaning / Action
●
Check the CI module inserted completely (p. 45).
●
The tape or disc may be "write protected", missing or damaged.
●
The equipment may already be recording.
●
The recording may not be performed. Check the equipment.
●
Disc or tape may be full.
●
The broadcaster has stopped the service. Check the channel in TV
Guide. (p. 18)
●
The TV cannot detect the signal. Check the connection of the RF cable.
●
The PIN number you entered is wrong.
●
Communication error in VIERA Link function (p. 53).
●
A function is in progress.
●
The recorder is recording the programme from its own tuner. You can turn
the TV off and leave the equipment recording in the normal way.
●
"Auto Setup" will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
●
Q-Link or VIERA Link channel download is in progress.
●
The software updating is finished.
●
Perform "System Update Search Now" in System Update (p. 45).
If this is still unsuccessful, there may not be any new software available.
67