Touch Pad (Advanced); Basic Operation - Panasonic Toughbook CF-48 Series Reference Manual

Touch Pad
Using the Touch Pad
Work Surface
Right Button
Left Button
(Advanced)
Use the touch pad to move the cursor on the display and perform normal computer
operations.
NOTE
The touch pad has been designed to work only when a finger is used. Therefore,
do not use any implement on the touch pad.
The double-tapping speed of the touch pad cannot be changed.

Basic Operation

Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll
Scroll a document
(The movements will differ
depending on the applica-
tion.)
Besides the above operations, operations such as Zoom and Pan are possible by
allocating these functions to the buttons and/or pad. For more details, refer to [Help] in
[Start] - [Settings] - [Control Panel] - [Mouse].
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
tapping
or
double-tapping
or
Two quick taps, but on the
second tap leaving your
finger down (applying
pressure) and moving it
on the work surface.
When a check mark
After the drag operation (above : left side), it is neces-
sary to determine the destination (i.e., location of drop)
by one tap. Under the condition no destination is se-
lected, do not use the standby or hibernation function.
Nothing is shown on the display, even after resuming
from the standby or hibernation mode.
In this case, the display will return after a tap or click is
made.
*
In [Start] - [Settings] - [Control Panel] - [Mouse] - [Touch]
clicking
double-clicking
While holding down the
button, moving your finger
on the work surface.
is added for [Locking Drags] *
(To the next page)
5