Usb Devices; Windows 98 Windows 2000; Removing A Usb Device - Panasonic Toughbook CF-48 Series Reference Manual

USB Devices

USB Port
Windows 98
NOTE
Windows NT USB devices are not supported.
Installing a USB device
1
Power off your computer
Do not shut down using the standby or hibernation mode.
2
Connect the USB device to your computer
NOTE
For more detailed information, refer to the operation manual of the USB
device.
CAUTION
When a USB device is connected, there are cases the standby or hiber-
nation function will not operate in a normal manner due to the USB de-
vice. In addition, a USB device may have to be removed temporarily and
the computer restarted in cases where the computer is unable to start
up properly.
You may need to install drivers compatible with the OS you are using
for your USB devices.
Follow the on-screen instructions and refer to the operation manual
for USB devices on how to install the driver.

Removing a USB device

CAUTION
Do not remove a USB device while your computer is in the standby or
hibernation mode.
1
Double-click
device, then press [Stop].
(When removing a USB device after turning off the computer, this
step is not need.)
2
Remove a USB device.
Windows 2000
(
Windows 2000
on the task tray and select the USB
"Starting Up/Shutting Down")
35