Setting The Supervisor Password - Panasonic Toughbook CF-45 Series Reference Manual

Security Measures

Setting the Supervisor Password

(enabling, changing, disabling)
1
Run the Setup Utility
2
Using and
3
Using and
Enter
4
To enable or change your supervisor password
Enter your password at the [Enter Supervisor Password], then press
CAUTION
Your password will not be displayed on the screen.
Please limit your password to seven characters. Note that there is no dis-
tinction between upper and lower case letters.
White colored keys can be used. Note that the space bar and function keys
cannot be used.
Do not input your password while holding down on Shift or Ctrl .
Use only the upper horizontal row of numeric keys to input your user pass-
word.
Do not forget your password. If a password is forgotten you will be unable
to use your computer.
To disable your supervisor password
Using and
Go to step 7 .
5
Re-enter your password at the [Enter Supervisor Password
Again]
(This is for confirmation purposes.)
NOTE
When you do not want the User Password enabled, changed, or disabled with-
out permission,
use and
.
6
Using and
press
Enter
7
At the confirmation screen, press
8
Press to end the password setting procedure
Esc
9
Close the Setup Utility
( page 24)
, select [Supervisor Setup], then press
, select [Supervisor Password], then press
, select [Delete Supervisor Password], then press Enter .
to select [User Password Protection], then set [Enable] with
, select [Set Supervisor Password], then
Enter
( page 24)
10
Enter
.