Compressor Pump Safety Warnings - Central Pneumatic 67698 Set Up And Operating Instructions Manual

non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
3. Compressor Pump use and care
a. disconnect the plug of the
compressor from the power source
before making any adjustments,
changing accessories, or storing the
compressor pump. Such preventive
safety measures reduce the risk of
starting the unit accidentally.
b. store an idle compressor pump
out of the reach of children and
do not allow persons unfamiliar
with the compressor pump or
these instructions to operate it. A
compressor pump is dangerous in the
hands of untrained users.
c. maintain the compressor pump.
keep the compressor pump clean
for better and safer performance.
Follow instructions for lubricating
and changing accessories. keep
the outside surfaces dry, clean and
free from oil and grease. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
compressor's operation. if damaged,
have the compressor repaired before
use. Many accidents are caused by a
poorly maintained compressor pump.
d. use the compressor pump in
accordance with these instructions,
taking into account the working
conditions and the work to be
performed. Use of the compressor
pump for operations different from those
intended could result in a hazardous
situation.
4. service
a. Have your compressor pump
serviced by a qualified repair person
Page 4 For technical questions, please call 1-800-444-3353.
using only identical replacement
parts. This will ensure that the safety of
the compressor pump is maintained.
Compressor Pump
safety warnings
1. Wear ANSI-approved safety goggles
during use.
2. Install pulley and belt safety guard before
use.
3. Before first and every use, verify
Pump has sufficient oil.
4. The use of accessories or attachments
not recommended by the manufacturer
may result in a risk of injury to persons.
5. misalignment between motor and
Pump can damage the belt wheel.
Use a straight edge, such as a yardstick,
to check and adjust alignment as
needed.
6. use proper size motor and motor
pulley. This air compressor Pump must
be installed with a 5 HP electric motor
and pulley (both not supplied) which can
turn the Air Compressor Belt Wheel at
approximately 1050 rpm.
7. install motor, pulley belt and pulley
belt cover securely. Be sure to use the
proper size bolts to install your motor
(not included). The belt and belt cover
(not included) must be strong enough to
prevent breaking and possible injury.
8. be sure all equipment is rated to the
appropriate capacity of this pump.
Make sure that the lowest rated piece
of equipment you are using can handle
the maximum pressure of the Air
Compressor Pump (see Specifications).
9. do not direct the air outlet at any
person or animal.
SKU 67698