Panasonic TX-22LT2F Operating Instructions Manual page 7

2. Connection of TV and VCR using Scart and RF cables
Aerial
(Not Supplied)
AV1,AV2
Scart sockets
Aerial Lead
3. Q-Link connection of TV and VCR using Scart and RF cables
Aerial
(Not Supplied)
AV2
Scart socket
Aerial Lead
LCD TV
Aerial Input socket
AV1
Scart socket
VCR
Aerial
Input
socket
LCD TV
Aerial Input socket
AV1
Scart socket
VCR
Aerial
Input
socket
RF connection
Connect the AERIAL to the Aerial in socket of the
VCR and an RF cable from the VCR Aerial Out
socket to the TV Aerial socket (
Scart Connections
The VCR can also be connected to the TV using a
Scart cable if you are using a Scart equipped VCR.
• Use the TV's AV1 Scart socket for a VCR.
• Use the TV's AV2S Scart socket for an S-Video
VCR.
Notes:
Aerial
• Additional equipment and cables are not supplied.
Output
socket
• Further details of audio / video connections can
be found on pages 38 and 39.
RF connection
Connect the AERIAL to the Aerial in socket of the
VCR and on RF cable from the VCR Aerial Out
socket to the TV Aerial socket (
Scart connection
The VCR must be connected to the AV2 Scart
socket of this TV using a 'fully wired' Scart cable.
Note:
If using a "Q-Link" VCR then the AV1 Scart of
the VCR must be connected to the AV2 socket
of the TV. If your VCR is not a "Q-Link" VCR,
please consult your VCR operating instruction
book.
Notes:
• Additional equipment and cables are not supplied.
Aerial
• Further details of audio/ video connections can
Output
socket
be found on page 38 and 39.
• Further information for VCR and Satellite
Receiver installation with this TV can be found
on page 8.
Quick start Guide
).
).
7