Panasonic Quintrix TX-24DX1L Operating Instructions Manual page 7

QUICK START GUIDE
What is Q- -Link ?
Q--Link allows direct communication between the TV and a Q--Link (or Q--Link compatible) VCR, this will enable features such as
downloading of tuning information from the TV to the VCR.
When using a "
NEXTVIEWLINK
Preset Download
D
Direct TV Record
D
When using a "Q- -Link" VCR the main features possible are the following :
Preset Download
D
Direct TV Record
D
TV/VCR Auto Power On
D
VCR Auto Power Standby
D
VCR Image view On
D
This TV will also communicate with other VCR's that bear the following logos :
"DATA LOGIC" (a trademark of Metz Corporation).
D
"Easy Link" (a trademark of Philips Corporation).
D
"Megalogic" (a trademark of Grundig Corporation).
D
"SMARTLINK" (a trademark of Sony Corporation).
D
These VCR's may support some or all of the above functions. Refer to the VCR operating instruction book.
Further information on Q--Link can be found on page 27.
In order for Q- -Link to function correctly, the Scart cables must be connected in a certain way, dependent on whether the TV
is being connected to a VCR (option 3, below) or to a VCR and Satellite Receiver (option 4, overleaf).
3. Q- -Link connection of TV and VCR using Scart and RF cables
Scart Connection
The VCR must be connected to the AV2 Scart socket of this TV using a 'fully wired' Scart cable.
D
Note :
If using a "Q- -Link" VCR then the AV1 Scart of the VCR must be connected to the AV2 socket of the TV. If your VCR is not a "Q- -Link"
VCR, please consult your VCR operating instruction book.
RF Connection
Connect the RF cable to the Aerial In socket of the VCR and an RF cable from the VCR Aerial Out socket to the TV Aerial
D
socket ( ).
TV
Aerial
Input
socket
Notes :
Additional equipment and cables are not supplied.
Further details of Audio/ Video connections can be found on pages 33 and 34.
Further information for VCR and Satellite Receiver installation with this TV can be found on page 29.
" VCR the main features possible are the following :
-- Downloading of tuning information from the TV to the VCR.
-- For immediate recording of the current program (What You See Is What You Record).
-- Downloading of tuning information from the TV to the VCR.
-- For immediate recording of the current program (What You See Is What You Record).
-- When the VCR plays a tape the TV will automatically switch On and select the AV2 input.
-- When the TV is switched into Standby, the VCR will also switch into Standby.
-- If the TV is in Standby mode and the VCR sends a menu to be displayed on the TV screen
(e.g. Main menu), the TV will automatically switch On and the menu will be displayed.
Mains
Mains
Socket
Socket
AV2 Scart
socket
VCR
AV1
Scart socket
Aerial
Input
socket
Aerial
Output
socket
7