Identifying Controls - Panasonic Viera TX-P42U10B Operating Instructions Manual

Identifying Controls

TV
SD Card slot
(p. 48)
CI slot
(p. 45)
AV3 terminals
(p. 61)
Headphones jack
(p. 61)
Mains power On / Off switch
●
Switch On to turn on the TV or turn the TV
to standby mode by the remote control
8
SD CARD
Common
Interface
AV3
S-V
V
L
R
Changes the input mode
Remote control signal receiver
●
Do not place any objects between the TV remote control signal
receiver and remote control.
Timer LED
●
Active for Timer Programming or
Standby for Direct TV Recording: orange (flash)
Timer Programming On: orange
Power LED
●
Standby: red
On: green
●
When using the remote control, indicates the TV has received a
command.
Function select
●
Volume / Contrast / Brightness /
Colour / Sharpness /
Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup
(p. 34 and p. 35)
Increases or decreases the
channel position by one.
When a function is already
displayed, press to increase or
decrease the selected function.
When in Standby mode,
switches TV On.