Table of Contents
Advertisement
Adjusting the pictures on
the LCD screen
1
Press [LCD MENU].
≥ It is also possible to display with the following
procedures.
1 Press [OPTION].
2 Select "To Others" with [3, 4], and press [OK].
3 Select "LCD Menu" with [3, 4], and press [OK].
LCD Menu
Picture
Dynamic
Brightness
Colour
Monitor
On
OPTION
RETURN
2
Select the item with [3, 4].
3
Change the setting with [3, 4, 2, 1].
Picture:Adjusting image quality
! Standard: Standard
! Dynamic:
Picture with high contrast
! Night:
Picture suitable for viewing in dark places
! User
jBrightness: s5 to r5
jColour: s5 to r5
Monitor:Displaying images
! On:
Image display
! Off:
No image
≥ When "Off" is selected, select "Yes" with [2, 1], and then
press [OK].
To exit the screen
Press [EXIT].
To display images when the "Monitor" is set to "Off "
Press [LCD MENU], [OPTION] or [DISC/SD].
≥ Underlined items are the factory presets.
≥ If you are not using the LCD on this unit,
select "Off". No image mark is displayed on
the lower left of the screen when it is set to
"Off".
Loading the disc or SD
card
Disc
1
Press [OPEN].
2
Set the disc and close the lid.
≥ Set the disc securely until you hear a "click", with the
label side up. (Double-sided disc: place the label side up
that you want to play back)
≥ Some discs may start playing when they are loaded with the
unit turned on.
≥ About discs with a cartridge
jDVD-RAM, DVD-R: Remove the disc from the cartridge
and set the disc in the tray. Cartridge discs cannot be used.
jPlace the disc back into the cartridge for storage to prevent
dirt and scratches after use.
≥ Do not touch the lens as it may
make it dirty.
SD card
1
Open the cover at the side of the unit.
2
Insert the SD card into the SD card slot.
≥ With the label side up, insert the card straight in the
direction shown in the figure, until you hear a sound.
3
Close the cover.
To remove the card
In step 2 above, press the centre of the card until it "clicks", and
pull the card out straight.
Lens (A)
15
VQT3C18
Advertisement
Table of Contents
